SOFTFLOW® – FREQUENTLY ASKED QUESTIONS

Advanced Scale Prevention & Water Conditioning Technology

SECTION 1: UNDERSTANDING SOFTFLOW® TECHNOLOGY

What is SOFTFLOW®?

SOFTFLOW® is an advanced water conditioning and scale prevention system that uses sequestering technology to control scale formation caused by dissolved minerals such as calcium and magnesium. It helps protect plumbing systems, water heaters, appliances and other water-contact surfaces from limescale deposits.

SOFTFLOW® uses polyphosphate-based sequestering technology. Its specially formulated media helps stabilise dissolved hardness minerals and inhibit their tendency to crystallise and form hard scale deposits.

Sequestering is a process in which certain compounds bind with or stabilise dissolved metal ions, reducing their tendency to precipitate and form deposits. In water treatment, this technology is used to control mineral scaling.

SOFTFLOW® uses specially formulated, slow-dissolving polyphosphate glassy-bead media designed for scale prevention applications.

No. SOFTFLOW® does not physically remove calcium and magnesium ions from water. Instead, it helps control their scaling behaviour through sequestration.

No. SOFTFLOW® does not reduce Total Dissolved Solids (TDS). The dissolved minerals remain in the water.

SOFTFLOW® releases its active media into the water in controlled quantities. This helps interfere with the crystallisation and deposition of hardness minerals on pipes, heating elements, faucets and appliances.

No. SOFTFLOW® uses polyphosphate-based chemical sequestration technology. It does not depend on magnets, electronic signals or electricity.

No. SOFTFLOW® uses polyphosphate-based chemical sequestration technology. It does not depend on magnets, electronic signals or electricity.

SECTION 2: DIFFERENCE BETWEEN SOFTFLOW® AND CONVENTIONAL WATER SOFTENERS

How is SOFTFLOW® different from a conventional water softener?

A conventional ion-exchange water softener removes calcium and magnesium ions through an ion-exchange process. SOFTFLOW® works differently by stabilising these minerals to help prevent scale formation. Key differences:

• No salt regeneration.

• No electricity required.

• No regeneration wastewater.

• No ion-exchange resin.

• No need for automatic regeneration valves.

• Retains the naturally dissolved minerals in water.

No. SOFTFLOW® does not remove calcium and magnesium through ion exchange. Therefore, the water generally retains its natural mineral characteristics and feel.

No. SOFTFLOW® does not require salt for regeneration.

No. Unlike conventional media filters and ion-exchange softeners, SOFTFLOW® does not require routine backwashing or salt regeneration.

SOFTFLOW® does not use sodium-based ion exchange and therefore does not add sodium through a conventional softening process. The actual water chemistry depends on the source water and treatment conditions.

SECTION 3: BENEFITS AND APPLICATIONS

What are the major benefits of SOFTFLOW®?

• Helps prevent limescale formation in plumbing systems.

• Helps protect water heaters and heating elements.

• Helps reduce scale deposits on faucets and showerheads.

• Helps protect water-dependent appliances.

• Can reduce scale-related maintenance requirements.

• Requires no electricity or salt regeneration.

• Does not require regeneration wastewater.

Yes. SOFTFLOW® can be installed upstream of water heaters to help control scale formation on heating elements and internal water-contact surfaces.

Yes. It can be installed on the water supply line feeding these appliances to help minimise scale deposits.

SOFTFLOW® helps control the formation of hard mineral scale. However, it does not remove all dissolved minerals, and some mineral residue may still appear depending on water quality and usage conditions.

Hard water can contribute to soap deposits and mineral residue on skin and hair. By controlling scale-forming mineral behaviour, SOFTFLOW® may help improve the bathing experience. Individual results can vary.

Yes. SOFTFLOW® can be considered for borewell water containing calcium and magnesium hardness. Water analysis is recommended before selecting the appropriate model.

Yes. SOFTFLOW® can be installed on suitable incoming water supply lines to help protect plumbing, bathrooms, geysers and household appliances.

Yes. It can be considered for suitable commercial applications, including hotels, residential complexes, hospitals and institutional buildings, subject to water quality, flow rate and application requirements.

Yes. SOFTFLOW® can be considered for selected industrial applications requiring scale control. Proper technical evaluation is necessary based on water chemistry, operating temperature, flow rate and system design.

SECTION 4: DRINKING WATER AND RO APPLICATIONS

Is SOFTFLOW®-treated water safe for drinking?

SOFTFLOW® uses food-grade media intended for potable-water applications. However, it is a scale prevention system, not a complete drinking-water purification system. It does not disinfect water or remove all chemical and microbial contaminants. Use an appropriate drinking-water purification system where required.

No. SOFTFLOW® is not a disinfection system. It does not remove or eliminate bacteria, viruses or other microorganisms.

No. SOFTFLOW® is designed primarily for scale prevention and is not intended to remove heavy metals.

Yes. SOFTFLOW® can be considered as a pre-treatment device upstream of an RO system to help control scale formation caused by hardness minerals.

SOFTFLOW® may help reduce hardness-related scaling on RO membranes when correctly selected and operated. However, it does not replace the need for proper RO pre-treatment, water analysis and membrane operating controls.

SOFTFLOW® may help manage scaling conditions that affect RO performance. Actual recovery improvement depends on feed-water quality, membrane characteristics, operating pressure, recovery ratio and overall system design. Performance should be established through site-specific testing.

SECTION 5: INSTALLATION AND OPERATION

Where should SOFTFLOW® be installed?

SOFTFLOW® is generally installed inline on the incoming water supply or the appropriate distribution line, upstream of the plumbing fixtures and equipment that require scale protection.

Yes. It can be installed on the main incoming water line, provided the model is correctly selected according to the required flow rate and pipe size.

Yes. Installation after the water pump is generally suitable where the system design provides the recommended operating flow and pressure conditions.

When correctly sized and installed, SOFTFLOW® is designed to allow water to pass through without a significant pressure drop. Actual pressure loss depends on flow rate and installation conditions.

No. SOFTFLOW® operates without electricity.

Professional plumbing installation is recommended to ensure correct positioning, leak-free connections and suitable flow conditions.

Yes, provided it is protected from direct sunlight, excessive heat, physical damage and unsuitable environmental conditions.

SECTION 6: WHITE PARTICLES, RESIDUE AND CUSTOMER DOUBTS

Why do I still see white patches on utensils after installing SOFTFLOW®?

SOFTFLOW® does not remove dissolved minerals from water. Therefore, some mineral residue may continue to appear on utensils and surfaces. Existing deposits and changes in the nature of scale may also affect the cleaning experience.

White particles can have different causes, including existing mineral deposits, suspended solids and external contamination. Their source should be identified before attributing them to SOFTFLOW®.

No. Existing hard scale deposits may require mechanical cleaning or an appropriate descaling process. SOFTFLOW® is primarily designed to help control further scale formation, not to act as an instant descaling chemical. 

Yes, SOFTFLOW® is designed for scale prevention.

Not necessarily. Particles can originate from sources other than calcium and magnesium hardness, including suspended solids, dust and deposits within the plumbing system.

SOFTFLOW® does not eliminate all dissolved minerals. The appearance of residue depends on water hardness, TDS, temperature, evaporation and surface conditions.

SECTION 7: MAINTENANCE AND PRODUCT LIFE

How long does SOFTFLOW® last?

Media life depends on water hardness, consumption, flow conditions and application. The replacement interval should follow the model-specific product guidelines.

Replacement frequency depends on water quality and total water consumption. The recommended replacement schedule should be followed based on the specific model and its rated treatment capacity.

SOFTFLOW® requires no maintenance. Periodic inspection for leaks, physical damage, water flow and media condition is recommended.

An unused, unactivated device should be stored dry in its original packaging and protected from moisture. Once activated by water contact, follow the product-specific storage and handling instructions.

When the active media reaches the end of its rated service life, its scale-control effectiveness may reduce. The device should be replaced according to the product guidelines.

No routine chemical cleaning or regeneration is required.

SECTION 8: PRODUCT SELECTION AND TECHNICAL SUPPORT

How do I select the right SOFTFLOW® model?

Model selection depends on:

• Water flow rate.

• Pipe size.

• Water hardness.

• Daily water consumption.

• Number of users or connected appliances.

• Application and installation conditions.

Yes, where the selected model is appropriately sized for the house’s incoming water flow and consumption requirements.

Multiple units may be considered for higher flow rates or larger applications. The arrangement should be determined through technical evaluation.

SOFTFLOW® is designed primarily for water containing scale-forming minerals. Its suitability depends on the complete water analysis, including hardness, pH, TDS, iron and other relevant parameters.

Water testing is recommended. It helps determine hardness levels, select the appropriate model and establish the correct installation requirements.

Yes. SOFTFLOW® can be integrated with suitable filtration and water treatment systems, subject to compatibility and correct installation.

SECTION 8: PRODUCT SELECTION AND TECHNICAL SUPPORT

Check the inlet and outlet connections, plumbing valves, upstream filters and possible blockages. If the issue continues, contact the authorised service team for inspection.

SECTION 9: ENVIRONMENTAL AND ECONOMIC BENEFITS

Is SOFTFLOW® environmentally friendly?

SOFTFLOW® does not require salt regeneration or routine regeneration wastewater discharge. Its body uses recyclable polymer material. Environmental performance also depends on media composition, usage and disposal practices.

By helping control scale formation, SOFTFLOW® may reduce scale-related cleaning, servicing and maintenance requirements. Actual savings depend on the application and existing water conditions.

Reducing scale accumulation on water-contact surfaces may help maintain appliance operating efficiency and reduce scale-related maintenance. Actual appliance life depends on operating and maintenance conditions.

SOFTFLOW® itself does not consume electricity. By helping control scale on heating elements and other equipment, it may help maintain their operating efficiency. Actual energy savings should be assessed based on applicationspecific performance.

Add Your Heading Text Here

SECTION 8: PRODUCT SELECTION AND TECHNICAL SUPPORT

How do I select the right SOFTFLOW® model?

Model selection depends on:

• Water flow rate.

• Pipe size.

• Water hardness.

• Daily water consumption.

• Number of users or connected appliances.

• Application and installation conditions.

Yes, where the selected model is appropriately sized for the house’s incoming water flow and consumption requirements.

Multiple units may be considered for higher flow rates or larger applications. The arrangement should be determined through technical evaluation.

SOFTFLOW® is designed primarily for water containing scale-forming minerals. Its suitability depends on the complete water analysis, including hardness, pH, TDS, iron and other relevant parameters.

Water testing is recommended. It helps determine hardness levels, select the appropriate model and establish the correct installation requirements.

Yes. SOFTFLOW® can be integrated with suitable filtration and water treatment systems, subject to compatibility and correct installation.

SECTION 8: PRODUCT SELECTION AND TECHNICAL SUPPORT

How do I select the right SOFTFLOW® model?

Model selection depends on:

• Water flow rate.

• Pipe size.

• Water hardness.

• Daily water consumption.

• Number of users or connected appliances.

• Application and installation conditions.

Yes, where the selected model is appropriately sized for the house’s incoming water flow and consumption requirements.

Multiple units may be considered for higher flow rates or larger applications. The arrangement should be determined through technical evaluation.

SOFTFLOW® is designed primarily for water containing scale-forming minerals. Its suitability depends on the complete water analysis, including hardness, pH, TDS, iron and other relevant parameters.

Water testing is recommended. It helps determine hardness levels, select the appropriate model and establish the correct installation requirements.

Yes. SOFTFLOW® can be integrated with suitable filtration and water treatment systems, subject to compatibility and correct installation.

SECTION 8: PRODUCT SELECTION AND TECHNICAL SUPPORT

Check the inlet and outlet connections, plumbing valves, upstream filters and possible blockages. If the issue continues, contact the authorised service team for inspection.

SECTION 9: ENVIRONMENTAL AND ECONOMIC BENEFITS

Is SOFTFLOW® environmentally friendly?

SOFTFLOW® does not require salt regeneration or routine regeneration wastewater discharge. Its body uses recyclable polymer material. Environmental performance also depends on media composition, usage and disposal practices.

By helping control scale formation, SOFTFLOW® may reduce scale-related cleaning, servicing and maintenance requirements. Actual savings depend on the application and existing water conditions.

Reducing scale accumulation on water-contact surfaces may help maintain appliance operating efficiency and reduce scale-related maintenance. Actual appliance life depends on operating and maintenance conditions.

SOFTFLOW® itself does not consume electricity. By helping control scale on heating elements and other equipment, it may help maintain their operating efficiency. Actual energy savings should be assessed based on applicationspecific performance.

Add Your Heading Text Here

Check the inlet and outlet connections, plumbing valves, upstream filters and possible blockages. If the issue continues, contact the authorised service team for inspection.

SECTION 9: ENVIRONMENTAL AND ECONOMIC BENEFITS

Is SOFTFLOW® environmentally friendly?

SOFTFLOW® does not require salt regeneration or routine regeneration wastewater discharge. Its body uses recyclable polymer material. Environmental performance also depends on media composition, usage and disposal practices.

By helping control scale formation, SOFTFLOW® may reduce scale-related cleaning, servicing and maintenance requirements. Actual savings depend on the application and existing water conditions.

Reducing scale accumulation on water-contact surfaces may help maintain appliance operating efficiency and reduce scale-related maintenance. Actual appliance life depends on operating and maintenance conditions.

SOFTFLOW® itself does not consume electricity. By helping control scale on heating elements and other equipment, it may help maintain their operating efficiency. Actual energy savings should be assessed based on applicationspecific performance.

SECTION 9: ENVIRONMENTAL AND ECONOMIC BENEFITS

Is SOFTFLOW® environmentally friendly?

SOFTFLOW® does not require salt regeneration or routine regeneration wastewater discharge. Its body uses recyclable polymer material. Environmental performance also depends on media composition, usage and disposal practices.

By helping control scale formation, SOFTFLOW® may reduce scale-related cleaning, servicing and maintenance requirements. Actual savings depend on the application and existing water conditions.

Reducing scale accumulation on water-contact surfaces may help maintain appliance operating efficiency and reduce scale-related maintenance. Actual appliance life depends on operating and maintenance conditions.

SOFTFLOW® itself does not consume electricity. By helping control scale on heating elements and other equipment, it may help maintain their operating efficiency. Actual energy savings should be assessed based on applicationspecific performance.